Please login or register.

Login with username, password and session length
gfx gfx
  RC Pitstop is located @ 5501 204th st Langley #125 come see us today !!
gfx gfx
95657 Posts in 10261 Topics by 1076 Members - Latest Member: slash31 December 12, 2017, 12:33:42 AM
gfx* Home | Help | Search | Calendar | Login | Register | gfx
gfx  |  In The Pits  |  Tips and Tricks  |  Freezer tech!

Author Topic: Freezer tech!  (Read 806 times)


  • Guest
Freezer tech!
« on: July 17, 2008, 09:33:00 AM »
This is certainly not a new idea and has probably been done 

Some of the new tires like the M2 and M3 compounds the beads can stretch and make it hard to seat. I had that problem with my redrocks w/memory foams and rc4wd beadlocks.

Just like your willy, if you freeze rubber it shrinks. I put the foams and tires in the freezer for about 4 hours, the cold shrunk the bead and I was able to get a nice tight fit and secure the bead on the first try with each tire.

Works good on bushings in your 1.1 control arms too!
« Last Edit: July 17, 2008, 09:53:32 AM by mjh »

Offline pipeous

  • Just go outside already!
  • ******
  • Posts: 4311
    • View Profile
Re: Freezer tech!
« Reply #1 on: July 17, 2008, 04:23:52 PM »
I just used this method now. The tires I got were so soft I couldn't get them in the bead and remembered reading this, so thanks! worked like a charm.  |  In The Pits  |  Tips and Tricks  |  Freezer tech!

SMF 2.0.13 | SMF © 2016, Simple Machines Page created in 0.055 seconds with 13 queries.
Helios Multi © Bloc
Powered by MySQL Powered by PHP Valid XHTML 1.0! Valid CSS!